Robotics CS8C Bedienungsanleitung PDF herunterladen (Seite 104)

5.9. SERIAL PORT

Two serial ports are available on the CS8C controller (J203, COM1 and J201, COM2) to exchange data between

a VAL3 application and an equipment item in the cell.

The serial links are configured via the Input/Output display on the Control panel.

The parameters that can be configured in the Series link are:

• The transmission speed (from 110 to 115200 bauds)

• The number of data bits (from 5 to 8)

• The number of stop bits (1 or 2)

• Parity (even, odd or no parity)

• For J201 (COM2), the RS232/RS422 configuration. Default configuration is RS232.

• The flow control (none / hardware) (Influences COM1 only)

• The time lapse prior to triggering of an error message (maximum reading time lapse). A zero value suppresses

the time lapse control

• The end of string character

Details of the last two parameters are given in the VAL3 reference manual (SIO type).

CAUTION:

• Check the configuration of the Series link to the external equipment before connecting to

the electricity supply.

• When the controller is powered up, characters are sent via COM1 (start-up information for

BIOS, etc.) and they may disrupt operation of equipment connected to J203. This point must

be taken into account in the application.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 247 248

Keine Kommentare

Robotics CS8C Bedienungsanleitung Seite 104