Robotics COURIER Technical Information PDF herunterladen (Seite 94)

11-2 Courier I-modem Getting Started Guide

Setting PPP/ML-PPP Host and Originate Mode

Use the following *P settings to control PPP/ ML-PPP:

To do this Use this

setting

Or these settings

Set all PPP-related

default values

*P=0 *V2=5, S68.2=0, S68.3=0,

S68.6=0, S69.1=0, *D1=2,

*D2=24 *D3=90, *D4=44, *K=1

Set Asynchronous to

Synchronous PPP

*P=1 S68.2=1

Set Single Link

TurboPPP

*P=2 S68.2=0, S68.3=1

Set ML-PPP

*P=3 S68.2=0, S68.3=0 (default)

Note: Before you can use this feature you must enable

PPP/ ML-PPP using *V2=5.

Making Calls With ML-PPP

You can make ML-PPP calls with any PPP dialer.

Making an Outgoing ML-PPP Call

When making an outgoing ML-PPP call, enter the number of the host. If

the phone number for two calls is different, you must enter both of them.

They must be separated by an ‘&’ as shown below. If only one phone

number is given, the same number will be dialed for both calls.

Making an Incoming ML-PPP Call to Your I-modem

When someone attempts to call your I-modem using ML-PPP, they must

call the Data number first and the Voice number second.

See the following figures for an example of phone numbers with and

without ML-PPP using Windows 95. These rules apply when using

terminal programs with other operating systems.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 150 151

Keine Kommentare

Robotics COURIER Technical Information Seite 94