Robotics COURIER Technical Information PDF herunterladen (Seite 61)

Configuring with AT commands 7-5

d Set the Call Type.

Note: The call type that you choose will apply to outgoing

calls only.

The command is AT*V1=n

To set this call type Use this command

3.1 kHz audio (for modem,

fax, or voice calls)

AT*V1=0

Speech only AT*V1=1

4 Set up the DATA B-channel.

a Set the Service Profile Identifier (SPID).

The command is AT*S2=n

Example: AT*S2=84755511120111

b Set the Directory Number (DN).

The command is AT*P2=n

Example: AT*P2=5551112

c Set the Terminal Endpoint Identifier (TEI), if you were

assigned one. If not, continue with step d.

The default setting is 0, or dynamic TEI assignment.

The command is AT*T2=n

If your TEI Use this command

Is dynamic AT*T2=00

Is fixed AT*T2=n, where n is a number from 1

to 63.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 150 151

Keine Kommentare

Robotics COURIER Technical Information Seite 61