Robotics COURIER Technical Information PDF herunterladen (Seite 60)

7-4 Courier I-modem Getting Started Guide

2 Set the appropriate bus configuration.

To set Use this command

Point to point AT*M=0

Multipoint AT*M=1

3 Set up the ANALOG DEVICE B-channel.

a Set the Service Profile Identifier (SPID).

The command is AT*S1=n

Example: AT*S1=84755511110111 <Enter>

b Set the Directory Number (DN).

The command is AT*P1=n

Example: AT*P1=5551111

c Set the Terminal Endpoint Identifier (TEI), if you were

assigned one. If not, continue with step d.

The default setting is 0, or dynamic TEI assignment. The

TEI permanently identifies your link with the central office

switch.

The command is AT*T1=n

If your TEI Use this command

Is dynamic AT*T1=00

Is fixed AT*T1=n, where n is a number from 1 to 63.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 150 151

Keine Kommentare

Robotics COURIER Technical Information Seite 60